Der ERWEKA TBH 425 ist ein Bruchfestigkeits- und Kombinationstester zur halbautomatischen Messung von bis zu 10 Proben. Die Proben werden in ein sternförmiges Magazin eingesetzt und anschließend automatisch zur Teststation transportiert. Abhängig vom Gerätemodell findet dort eine automatische Messung der Tablettenhärte und -dicke (optional), Durchmesser oder Länge (bei Oblongs) von runden oder ungewöhnlich geformten Tabletten statt.
Eine Anordnungsroutine und eine Nut (optional) in der Teststation unterstützen die Ausrichtung von ungewöhnlich geformten Proben während der Brechung. Über die numerische Folientastatur mit alphanumerischer Unterfunktion können die Sollwerte, zusammen mit drei individuellen Plus-/Minus-Toleranzen (T3 = Erfolgs-/Misserfolgskriterien), und andere Bemerkungen eingegeben und für bis zu 50 Produkte gespeichert sowie für zukünftige Tests wieder abgerufen werden. Informationen wie Produktnamen und Chargennummer lassen sich ebenfalls leicht eintragen. Die gespeicherten Produktdaten können über eine SD-Speicherkarte oder einen USB-Speicherstick auf andere Geräte der TBH 325/425 Familie übertragen werden.
Die Kalibrierung der Härteteststation erfolgt vollständig menügesteuert und kann statisch mit Gewichten oder dynamisch mit dem elektronischen ERWEKA AutoCal 2.0 System durchgeführt werden. Außerdem lässt sich das Gerät über eine USB-Schnittstelle an einen Drucker anschließen und die eingegebenen Daten zu Dokumentationszwecken ausdrucken. Die LAN-/USB-Schnittstelle erlaubt es zur externen Steuerung zudem einen Computer mit der optionalen MC.NET Software zu verbinden. Zusammen mit dieser Option ist die TBH 425 Serie 100 % 21 CFR 11 konform.
Basic device for hardness and combination testing for the semi-automatic measurement of up to 10 samples
The ERWEKA TBH 425 D is based on the TBH 425, but in addition offers diameter/length measurement and documentation options of the samples. With this functions it can be ensured that the samples are placed in the correct alignment for the hardness testing process.
The semi-automated TBH 425 TD provides in addition to the standard TBH 425 an automatic measurement of sample's diameter/length and thickness by a motor driven and calibratable electronic linear potentiometer.
The unit can either fulfill a three parameter hard-copy print-out by a connected printer (optional) or can transfer the data to a PC with the optional MC.NET software. The ERWEKA TBH 425 WTD, which is based on the TBH 425 TD, is additionally equipped with an external Sartorius or Mettler analytical balance with windshield (20 mg to 64 g; accuracy ± 0.1 mg; Sartorius balance with in-built calibration weight) for connection with the unit. Before testing the other parameters, the sample is manually placed onto the balance, the weight is determined and the results are transferred to the unit's electronics.
Halbautomatisches Tablettentesten
10-Kammer Magazin führt automatisch Tabletten zur Teststation
Gewichtsmessung
Optionale Gewichtsmessung per extern angeschlossener Waage
Durchmessermessung
Tabletten bis 28 mm
Längenmessung
Tabletten bis 28 mm
Härtetesten
Härtemessbereich von 3 bis 500 Newton
LAN-/USB-Schnittstellen
LAN und USB-Schnittstellen zur externen Kontrolle und Speicherung von Ergebnissen durch die optionale MC.NET Software
Gewicht | 15 kg |
Dimensions (H x W x D) | 240 x 350 x 375 mm |
Voltage | 100 - 240 V / 50 - 60 Hz |
Schnittstellen | SD card, Ethernet (LAN), RS 232 C (option), 1x USB-A and 1x USB-B interface for printer / Autocal 2.0 |
Hardness range | 3 - 500 N (extended (option): 3 - 1000 N ± 1 N) |
Diameter/length | 2 - 28 mm (± 0.05 mm) |
Thickness (option) | 2.0 - 10 mm (± 0.05 mm) |
Weight (option) | 20.0 mg - 64 g** (± 0.1 mg) |
Constant speed | 0.1 - 3 mm/sec. |
Constant force | 10 - 200 N/sec. |
Calibration | Weights (statistic calibration) Optional: AutoCal 2.0 (dynamic calibration) |